Career

Job Description: 

• Interpret production drawings and specifications.
• A good knowledge about working with different types of steel forms such as I beam, angles, channels, tubes, plates etc.
• Plan the fabrication work to be executed within the allotted time.
• Prepare Jigs, Fixtures and layout for jobs as needed.
• Must be able to set and operate ARC/MIG/Spot Welding Machines.
• Prepare daily production report.
• Fabricate and full weld steel products such as steel structures, steel table frames, steel doors and frames, steel handrails etc.
• Installation at sites.
• To be able work under heavy work load at certain times.

Key Skills required; 

• Practical experience in three types of welding (MIG & ARC).
• Ability to work with TIG welding shall be considered an added advantage.
• Must have good experience in fabricating steel structures, Steel Doors & Frames, steel Hand Rails and Cabinets.
• Sound knowledge in reading and understanding shop drawings for fabrication in English.
• Should have good knowledge about the requirements of different welding positions such as 1G, 2G, 3G, 4G, 5G and 6G.
• Site Installation experience is a must.
• Proficiency in English Language is a must.
• Minimum 5 years experience as a Steel Fabricator.
• Previous certification from a certified body as 3G,4G or 6G welder will be considered an added advantage.
• To be able to work independently with minimum supervision.

Qualifications: 

• High School
• Technical Training Certificate

Age:    25 to 35 Max.

Job Description:

• Set up welding machines based on the job at hand or using a Welding Procedure Specification.
• Read and interpret blueprints and/or drawings to determine the specific welding requirements.
• Create quality welds according to blueprints (weld symbols).
• Ensure work is done safely and meets quality standards.
• Inspect welds for accuracy.
• Prepare product to be welded by grinding, drilling, and cutting steel parts as needed.
• A good knowledge about working with different types of steel forms such as I beams, angles, channels, tubes, sheets etc.
• Ability to identify and measure material.
• Plan the welding work to be executed within the allotted time.
• Must be able to set and operate ARC/MIG/TIG Welding Machines.
• Ability to weld stainless steel and aluminum with TIG welding shall be considered as an added advantage.
• Full weld steel products such as steel structures, steel table frames, steel doors and frames, steel handrails etc.
• Installation at sites.
• To be able work under heavy work load at certain times.
• Show an attitude and keenness towards learning something new always.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.

 Key Skills required; 

• Practical experience in three types of welding (TIG, MIG & ARC).
• Must have good experience in welding steel structures, Steel Doors & Frames, steel Hand Rails and Cabinets.
• Sound knowledge in reading and understanding shop drawings for fabrication in English.
• Should have good knowledge about the requirements of different welding positions such as 1G, 2G, 3G, 4G, 5G and 6G.
• Good understanding of Steel material behavior especially under heat of welding and the knowledge of using appropriate fabrication techniques to avoid or minimize such distortions.
• Welding quality should meet the required welding codes with consistent bead formation and non-existence of blow holes.
• Previous certification from a certified body as 3G,4G or 6G welder will be considered an added advantage.
• To be able to work independently with minimum supervision.

Qualifications: 

• High School
• Technical Training Certificate 

Age:      25 to 35 Max.

Job Description:

• To be able to read and interpret shop drawings and specifications in english.
• Plan the fabrication work to be executed within the allotted time.
• Prepare Jigs, Fixtures and layout for jobs as required.
• Set and Operate Press Brake, Guillotine and Notching machine.
• Set and Operate MIG/ARC/Spot Welding Machines for fabrication.
• Work on sites for installations as needed.
• Must be able to work together with a multinational team of workers.
• To be able to work under heavy work load at certain times.
• Show an attitude and keenness towards learning something new always.

Key Skills Required:

• Previous experience in a reputable company working as a sheet metal fabricator.
• Knowledge of different types of sheets used in industrial applications.
• Ability to weld sheet metal using MIG welding is a must.
• Previous experience in Metal Furniture Fabrication such as (Cabinets, Doors, Lockers, Shelving) is a must.
• Must have site installation experience.
• Must speak English language and be able to read and understand manufacturing drawings.
• Minimum 5 years’ experience in the capacity of Sheet Metal Fabricator.
• To be able to work independently with minimum supervision. 

Qualifications:

• High School
• Technical Training Certificate

Age:    25 to 35 Max.

 Available Vacancy: 02 person

Job Description: 

• Operate LASER/CNC Press brake machine as per standard operational procedures.
• Select appropriate cutting parameters as per recommended type of material and thickness.
• Make nesting drawings suitable to be uploaded to machine in DXF format.
• Optimize laser cutting and bending program to carry out the cutting and bending process efficiently.
• Estimate Time and Man hours required for both cutting and bending process using machine data to advise management for upcoming prospective jobs.
• Maintain Daily Production Log Book.
• Carryout routine preventive maintenance and maintain log book.
• Overlook the stock of consumables and spare parts required for the machine.
• Respond immediately to breakdown and arrange for repair.
• To be able work under heavy work load at certain times. 

Key Skills:

• Must have experience in working in sheet metal products such as Cabinets and Lockers
• Minimum 2 years’ Experience in a reputed company working as a LASER/CNC Press Brake operator
• Experience in working with LASER & CNC Machines such as CNC Turret Punch, CNC
• Waterjet and CNC press brakes and panel bending machines.
• Must have experience in troubleshooting on machine breakdown scenarios
• Must be able to read and follow Machine Maintenance Manuals
• Thorough experience in AUTOCAD Software is a must
• Must be able to read Production Drawings
• Written and oral proficiency in English Language is a must.
• Must have team work and leadership skills
• Must be able to lead multinational team of workers.
• To be able to work independently with minimum supervision. 

Qualifications:  Mechanical Diploma Holder 

Age:     25 to 35 Max

Job Description:

• Install, maintain and repair electrical systems in the factory which includes single phase and three phase wiring system and equipment in combination with electro-mechanical systems and pneumatic systems.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
• Make sure that electrical systems are safe and running efficiently.
• Repair electrical equipment, such as industrial fans, transformers, motors, control systems, air condition units (domestic types), power tools (drill machines, grinders etc).
• To be able to read blueprints and follow diagrams of circuits and wiring, and use many different hand and diagnostic tools in testing and fixing equipment.
• Ability to work independently or as part of a team or lead a team of junior technicians.
• Advise management on whether continued operation of equipment could be hazardous.

Skills and Training Requirements:

• Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
• Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
• Test electrical systems and for insulation and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, megger testers and oscilloscopes, to ensure compatibility and safety of system.
• Direct and instruct subordinate technicians to install, maintain, or repair electrical wiring, equipment, and fixtures.
• Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
• Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Construct and fabricate parts as needed, using hand tools and specifications.
• Knowledge in functionality of electro-mechanical systems and pneumatic systems is an added advantage.

Qualifications: 

• High School
• Higher national diploma

 Age:    25 to 35 Max.

Job Description:

• Prepares surfaces prior to beginning work.
• Fabricates, alters, repairs, and maintains walls, sidewalks, street curbs, floors, bathroom shower areas, sink counters, partitions, manholes, and other related structures or surfaces.
• Lays blocks or bricks following blueprints, plans, or drawings.
• Determines work requirements and sequence of masonry/tile assignments through review of work orders, plans, or drawings.
• Lays out work using chalk lines, plumb bobs, tapes, squares, and levels.
• Mixes cement using hoes, cement-mixing equipment, and/or hand tools.
• Cuts or breaks bricks and concrete using hammers, powered abrasive saws, paving breakers, drills, and/or hand tools.
• Molds expansion joints and edges using edging tools, jointers, and straightedge.
• Prepares form work and set up of steel re-enforcement bars required for casting of concrete slabs, columns and foundation footings.
• Setup and installation of dry walls made of gypsum boards and cement boards with internal steel channels and finishing joints.
• Ability to operate equipment such as forklift, bob cat shall be an added advantage.
• All-round exhibition of deferent trade skills shall be considered an added advantage.
   

Knowledge, Skills and Abilities:

• Knowledge of related tools, masonry techniques, equipment and materials.
• Maintaining tools and workspaces.
• Skill in the construction, alteration, repair, and maintenance of masonry structures and surfaces.
• Cutting, shaping and dressing materials.
• Professional tile laying on surfaces such as concrete and gypsum.
• Highly skilled in preparing and setup dry walls made of gypsum boards and cement boards.
• Skills in rough carpentry work such as preparing framing, formwork, roofing and other structural work shall be considered an added advantage.

  Age:  25 to 35 Max

Job Description:

• Assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment.
• Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.
• Locate and mark the position of pipe installations, connections, passage holes, and fixtures in structures, using measuring instruments such as rulers and levels.
• Install pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks, toilets and other sanitaryware using hand and power tools.
• Repair and maintain plumbing, replacing defective washers, replacing or mending broken pipes, and opening clogged drains.
• Direct workers engaged in pipe cutting and preassembly and installation of plumbing systems and components.
• Install underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems.

Knowledge, Skills and Abilities:

• Knowledge of related tools, plumber techniques, equipment and materials.
• Attention to details when installing plumbing fittings and different types of sanitaryware fittings.
• Knowledge and awareness of different units of measurements used in the plumbing industry and ability to identify and measure different types of plumbing fittings.

Age: 25 to 35 Max

Carpenter Job Responsibilities: 

• Perform finish and trim carpentry work according to plans and specifications.
• Fabricate items such as bookcases, cabinets and work counters to meet a variety of maintenance and facility needs as per drawings provided.
• Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter’s level, plumb bob, and laser levels.
• Measure, fabricate and install wooden cabinets, countertops and other wooden furniture components.
• Shape materials to prescribed measurements and ensure that casework hardware is properly installed.
• Shapes or cuts materials to specified measurements, using hand tools, machines, or power saws.
• Perform finish and trim carpentry work according to plans and specifications.
• Assist in building a variety of wood constructed items and modify and adapt to specific needs.
• Assembles and fastens materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
• Removes damaged or defective parts or sections of structures and repair or replace, using hand tools.
• Polish wooden furniture and surfaces using specific varnish or coating systems as per project specifications and mixing instructions of coating manufacturer.

Education, Experience, and Requirements:

• High school diploma is an asset
• 5 years of experience in commercial or residential carpentry.
• Ability to read and comprehend schematic diagrams, blueprints, sketches, building plans and other specifications.
• Keen attention to detail.
• Able to use common hand tools and power tools.
• Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation.

Age: 25 to 35 Max

Job Description: 

• Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
• Positions objects to be plated in frame or suspends them from positive terminals of power supply.
• Removes object from plating solution after specified time or when desired thickness of metal is deposited on them.
• Measures or estimates amounts of electric current needed and time required to coat objects and adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
• Immerses objects to be coated or plated into cleaning solutions or sprays with conductive solution to prepare object for plating.
• Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
• Plate small objects such as nuts or bolts, using motor-driven barrels.
• Monitors and measures thickness of electroplating on component part to verify conformance to specifications, using micrometer.
• Rinses coated object in cleansing liquids and dries with cloth, centrifugal driers, or by tumbling in sawdust filled barrels.
• Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
• Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
• Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
• Mix and test solutions, and turn valves to fill tanks with solutions as per data sheets of plating chemicals.
• Periodic testing of plating baths and controlling the required chemical levels, pH levels by using makeup solutions.
• Inspect coated or plated areas for defects such as air bubbles or uneven coverage.
• Perform equipment maintenance such as cleaning tanks and lubricating moving parts of conveyors.
• Proper cleaning and maintenance of equipment.
• Show an attitude and keenness towards learning something new always.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic. 

Key Skills required; 

• Know the basics of different types of plating such as zinc, nickel, chromium, copper, brass and their limitations of coating on different types of metallic and non-metallic surfaces.
• Determine the appropriate plating system to be adopted based on the types of coating and surface to be plated.
•  Effectively communicate and understand job instructions both verbally and written in the English language.
• Basic knowledge of electrical current, voltages, polarity is a must.
• Perform regular light duty corrective and preventive maintenance on equipment.
• Ability to define problems, collect data, establish facts and draw valid conclusions.
• To be able to work independently with minimum supervision.

Qualifications:

• High School
• Technical Training Certificate
• Strong background in industrial electro plating.

Age:      25 to 35 Max.

Job Description: 

• Experience in Manufacturing / Automobile / Engineering / Process industry in installation, troubleshooting and repairing of machines and utility equipment such as;
  • Electric motors, pumps, air conditioning systems, compressors, centrifugal pumps, portable electrical generators.
  • Lathe, shaper and milling machines.
  • Hydraulic Press machines, sheet and pipe roller machines, press brakes, Injection molding machines.
  • Welding machines, plate cutting machines, flame cutting machines
  • Mobile cranes, man lifts, scissor lifts, forklifts
• A good knowledge about maintenance and trouble shooting of hydraulic and pneumatic systems.
• Plan and execute preventive maintenance programs for all the machinery such as replacement of hydraulic oil, bearings and other parts subject to regular wear and tear.
• Ability to go through maintenance manuals and machine literature to identify required spare parts and raise purchase requests.
• Possess sound electrical knowledge that might be required for work on above equipment.
• Monitor maintenance status of all portable equipment deployed for site work.
• Advise workers on the proper use of each piece of machinery or equipment.
• Experience in automobile maintenance, trouble shooting and repair will be an added advantage.

 Key Skills required; 

• Multi skilled persons are preferred for this position and shall be given priority upon..
• Ability to find spare parts online that are not available locally.
• Proficiency in English Language is a must.
• To be able to work independently with minimum supervision.

Qualifications: 

• Diploma in Mechanical Engineering or related discipline.
• Professional certification course completed on Mechanical Maintenance

Age:      25 to 35 Max.

Job Description: 

• Prepare parts for coating.
• Follow all principles and practices of powder coating application.
• Operate all coating equipment including guns, hoppers and booth collection systems.
• Observe machine gauges and equipment operation to detect defects.
• Determine paint flow, viscosity and coating quality by performing visual inspections or by using viscometers.
• Bake parts at appropriate temperatures within time limitations.
• Knowledge of thermosetting resin coatings, wash and pretreatments.
• Knowledge of painting systems such as epoxy, polyurethane, etc.
• Painting using air and airless spray guns, rollers and brush.
• Read and understand powder and painting material data sheets and understand the mixing ratios of thinners and hardners, application parameters, product storage conditions to be carried out.
• Ensure that all components are produced/coated efficiently, and are consistent with company established goals for quality and customer order on-time performance.
• Ensure quality standards and processes are used throughout facility.
• Load and unload parts or products onto fixtures.
• Good knowledge of the mechanics and repair of painting equipment.
• Proper cleaning and maintenance of equipment.
• Show an attitude and keenness towards learning something new always.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic. 

Key Skills required; 

• Know the basics and behavior of different types of powder such as polyester, epoxy, hybrid and painting systems such as epoxy, polyurethane, etc.
• Strong attention to detail.
• Effectively communicate and understand job instructions both verbally and written in the English language.
• Ability to perform basic mathematical computations. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations.
• Perform regular light duty corrective and preventive maintenance on equipment.
• Ability to define problems, collect data, establish facts and draw valid conclusions.
• To be able to work independently with minimum supervision.

Qualifications: 

• High School
• Technical Training Certificate
• Strong background in powder coating and industrial painting

Age:      25 to 35 Max.

Job Description: 

• Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders.
• Read and interpret blueprints and/or drawings to determine the specific machining requirements.
• Study sample parts, blueprints, drawings, and engineering information in order to determine methods and sequences of operations needed to fabricate products, and determine product dimensions and tolerances.
• Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers.
• Select the appropriate tools, machines, and materials to be used in preparation of machinery work.
• Measure, examine, and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers.
• Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations.
• Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines.
• Install repaired parts into equipment, or install new equipment.
• Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter.
• Dismantle machines or equipment, using hand tools and power tools, in order to examine parts for defects and replace defective parts where needed.
• To be able work under heavy work load at certain times.
• Show an attitude and keenness towards learning something new always.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic. 

Key Skills required; 

• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Repairing - Repairing machines or systems using the needed tools.
• Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
• Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Analytical Skills and attention to detail
• To be able to work independently with minimum supervision.

Qualifications: 

• High School
• Technical Training Certificate 

Age:      25 to 35 Max.

Job Description:

• Grinds, files, or sands surfaces of metals such as steel, stainless steel on products such as steel cabinets, handrails, sheet metal products, structural steel components etc, using hand tools, power tools, and other means as deemed necessary.
• Thorough knowledge of metal finishing techniques to achieve different levels of finishing such as hairline (#4) finishing, mirror finishing in stainless steel etc.
• Examine and feel surface of metal to detect defects, like dents, scratches, or breaks in metal and rectify with proper finishing technique.
• Prepare metal surfaces for electroplating processes.
• Smooth surface of item to specified finish, using hand tools powered tools as per project specifications
• Finish and polish metal surface, using powered polishing wheel or belt using the appropriate grades of grinding and sanding material such as flap disks, sanding disks, buffing wheel etc.
• Repair previously finished finished/coated material.
• Ability to do Tig welding shall be considered an added advantage.

Qualifications: 

• High School
• Technical Training Certificate

Age:      25 to 35 Max.

Job Description:

We are seeking an experienced, dedicated Quality Control Engineer to join our team. In this position, you will maintain quality standards by inspecting and approving incoming materials, in-process production, finished products, and recording the results. Excellent communication and leadership skills are a must, as well as a keen attention to detail.

Duties and Responsibilities

• Approve incoming materials by confirming specifications, conducting a visual and measurement tests, and rejecting and returning unacceptable materials and raise Non-Conformance report (NCR).
• Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the Production Manager to avoid future recurrence.
• Approve all finished products by confirming against project specifications/drawings and conducting required tests.
• Return products for re-work if needed and complete documentation and close NCR to confirm re-work.
• Document and update inspection results by completing reports and logs.
• Document all QA/QC related documentation such reports, material test certificates (MTC) of raw material received, material data sheets etc.
• Keep measurement equipment and instruments operating by following operating instructions, calibration and calling for repairs.
• Maintain safe work environment by following standards and procedures and complying with legal regulation.
• Coach and mentor junior employees; seek opportunities to grow leadership in others.
• Instruct directly to workers in the production on the corrective actions to be adopted to overcome quality issues.
• Update company quality plan on a regular basis and apply strictly.
• Apply project specific quality plans for both company and site and monitor closely its strict implementation.
• Update job knowledge by participating in educational opportunities, reading technical publications, attending seminars, watching industry videos, etc.
• Accomplish organization mission by completing related results as needed

Qualification:

• Sc. degree in mechanical or manufacturing engineering.
• Excellent computer skills, including MS Office.
• Excellent report making and presentation skills.
• Strong communication skills, including the ability to explain and demonstrate methodologies in English.
• Understanding of manufacturing methods and procedures.

Age:

• 25 to 35

Job Description:

We are seeking an experienced, Production Engineer to join our team. In this position, you will execute the production plan and activities set together with the Production Manager of the company. Overall day to day overlooking of all production activities as well as problem solving for smooth and un-interrupted activity in the shop floor. Excellent communication and leadership skills are a must, as well as a keen attention to detail.

Duties and Responsibilities

• Develop, coordinate and monitor all aspects of production, including selection of manufacturing methods, fabrication, or operation of product designs.
• Overall monitoring of all production activities to make sure execution is done as per drawings, specifications and client requirements as set by the production plan.
• Provide feedback to design engineers on customer problems or needs.
• Prepare production plans in coordination with the production manager taking into consideration the of both client and company priorities.
• Make sure the required raw material, manpower, machinery and equipment are allotted or made available well in advance prior to commencement of new projects on the shop floor.
• Plan all materials for new products and ensure optimal utilization of all resources and administer product orders and ensure compliance to all timeframe for all fabricated products.
• Allocate the suitable skilled workforce required for execution of each project both in the factory and at site in coordination with the production manager.
• Distribute the specific jobs to be carried out in the laser cutting, waterjet cutting, press brake stations, panel bending, machine shop, powder coating and painting sections for all job orders released to the production department.
• Guide the workers on the shop floor with the necessary technical know how to execute their tasks.
• Analyze all root causes for all fabrication issues and resolve same and implement all new process tools according to required order.
• Coordinate with technicians and provide support to all teams and maintain quality of all work processes in systems.
• Communicating with Supervisors, Peers, or Subordinates, providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
• Inspect and approve prototypes in coordination with the QA/QC engineer with conformance to project drawings and specifications prior to mass production.
• Develop or test models of alternate designs or processing methods to assess feasibility, sustainability, operating condition effects, potential new applications, or necessity of modification.
• Oversee installation, operation, maintenance or repair to ensure that machines or equipment are installed and functioning according to specifications.
• Establish or coordinate the maintenance or safety procedures, service schedule, or supply of materials required to maintain machines or equipment in the prescribed condition.
• Make sure the required QA/QC plans are adhered to in coordination with the QA/QC engineer.
• Make sure all safety plans are implemented strictly in coordination with the HSE officer.
• Assist production manager and prepare reports on regular basis after final inspections.
• Study industrial processes to maximize the efficiency of equipment applications, including equipment placement.

Qualification:

• Sc. degree in mechanical or production engineering.
• Excellent computer skills, including MS Office and Auto Cad
• Excellent report making and presentation skills.
• Strong communication skills, including the ability to explain and demonstrate methodologies in English.
• Understanding of manufacturing methods and procedures with the application of mechanical engineering principles.
• Sound knowledge about structural and sheet metal fabrication techniques and welding technologies. 

Age:   25 to 35

Job Description:

We are seeking an experienced, Quantity Surveyor/Estimator in Mechanical Engineering field to join our team. In this position, you will carry out material and price estimations enabling to submit commercial proposals to clients and enabling raw material purchase for ongoing projects. 

Duties and Responsibilities

• Carry out pricing and estimation based detailed pricing strategy in line with company objectives and guidelines.
• Carry out material estimation required for both project pricing as well as procurement of raw material for ongoing projects.
• Ability to read and understand mechanical engineering drawings, tender documents, bid packages and specifications.
• Prepare detailed bill of material (BOM) based on fabrication drawings for ongoing projects to be released for procurement of raw material.
• Prepare and update material status and procurement schedule.
• Evaluate quotations from suppliers and ensure quantities and specifications are in line with project specifications.
• Prepare quotations for clients and ensure quantities and specifications are in line with tender and project specifications.
• Minimize the cost of a project while achieving the required standards and quality objectives by optimizing material selection with possible alternatives.
• Undertake cost analysis for repair and maintenance work.
• Evaluate subcontractor claims and variations.
• Be familiar with commercially available steel sections such as steel plates, I Beams, channels, angles, etc. and their applicable conformance to ASTM, JIS, DIN, EN standards.
• Ability to go through standards and find compatibility for the job.
• To be able to verify site measurements and build up enough information required to carry out pricing and subsequent forwarding of the site information to design department for preparation of pre-submittal design drawings.
• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing for ongoing projects.

Qualification:

• Bachelor Degree in Quantity Surveying or Mechanical Engineering
• Technical and practical knowledge of all phases of contract development, award, administration and close-out relating to a multi-discipline civil/ construction projects.
• Capability to accept responsibilities and accomplish project objectives in a timely manner.
• Excellent team work and interpersonal skills.
• Good communication skills and strong English capability. 

Age:   25 to 35